|
|
|
Infrared Sauna PLUS Ionizer
PLUS Extra Ceramic Heater
|
|
This
Infrared Sauna has a unique folding
design that saves space. The functioning
of this device can be compared with that
of other larger and more expensive
saunas, but it is more compact when
folded. Convenient for storage and
carrying, it is suitable for beauty
salons, household use and travel. It
promotes sweating to invigorate and
energize the body. Includes a Ceramic
Heater for additional heat plus and
Ionizer for healthy negative ion
creation.
This Infrared Sauna adopts high
technology superconductive, super thin
heating elements (Carbon Fiber Panels)
which use FIR (Far Infrared
Ray)-emitting material with high heating
efficiency. |
|
|
|
- - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - |
|
Portable Infrared Sauna I-Spa Turbo
Features: |
 |
| |
|
Portable
Infrared Sauna I-Spa Turbo Ceramic Heater
|
 |
|
|
The sidewalls and
back walls are covered with Carbon Fiber FIR heating
elements. |
|
|
The ceramic heater which is
included is placed on the foam floor, and works
extremely well in very cold weather. |
|
|
When the FIR Sauna tent heats up
to 65 ° C (149 ° F), the FIR materials can emit 95%
of energy as heat. |
|
|
It takes only 5 minutes to reach
65 ° C (149 ° F) constant temperature. |
|
|
Low operating cost. |
|
|
Super conductive heating: with
the power of only 1500 watts, it can radiate energy
equivalent to that of ordinary heating materials at
2600 watts. |
|
|
Depending on the individual, the
volume of perspiration can reach up to 500 cc in 10
minutes. |
|
|
It takes only a minute to set up
or dismantle the device. No mess to clean up; just
wipe with a wet towel. |
|
|
Weighs only 11 kg. Dry and
portable. Use in a wide variety of locations.
|
|
|
1~5 level temperature control.
|
|
|
Automatic temperature control of
the ceramic heater. |
|
|
- - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - |
|
List of components |
| A-
|
Electronic
controls |
| B- |
Cover for top opening |
| C- |
Neck Band |
| D- |
Zipper for Sauna Entrance |
| E- |
Zipper for arm openings |
| F- |
Handheld Control Panel
(heating & timer) |
| G- |
Sidewalls & back wall
covered with FIR material |
| H- |
Ceramic Heater |
| I- |
Folding Chair |
| J- |
Ionizer |
|
 |
|
|
- - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - |
|
Portable
Infrared Sauna I-Spa Turbo Control Panel |
 |
 |
|
|
Press the POWER
button on the panel. The LED (TEMP) at the left will
show the default temperature at level 3 and the LED
(TIME) at the right will show the default time at 5
minutes. |
|
|
Press H button on the right.
The FIR heating panels will begin heating and the
indicator will light. |
|
|
The W button on the left works
as START or STOP for the ceramic heater. It is
not necessary to adjust the ceramic heater during
use because it has an automatic temperature control
function. |
|
|
Temperature settings: a total of
5 levels: level 3 is medium; level 5 is the highest
and usually for winter months while level 1 is the
lowest and is suitable for frail persons. It is
recommended to choose a suitable temperature
depending on the needs of the user. The level can
always be changed during a sauna session by pressing
+ or - under TEMP LED. |
|
|
Time setting: Maximum 20 minutes.
Press + or - button under TIME LED to set
working time. It will increase or decrease 5 minutes
for each time pressed. |
|
|
When the timer counts down to 20
seconds, a beep will sound three times to warn you
to continue heating or to end the session. If you
need to continue heating, repeat 1-5 above. If you
choose to end, wait for 30 seconds until the sound
of a long beep indicates the session is over. |
|
|
- - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - |
|
Portable
Infrared Sauna I-Spa Turbo Technical Specifications
|
|
Model
No. |
I-Spa Turbo
|
|
Voltage |
AC 110 - 120
V
|
|
Frequency |
60Hz
|
|
Time To Heat |
5 mins.
|
|
Temperature |
52~65°C
(grades 1~5)
|
|
Power Cord |
9.5 feet
|
Dimension
HxWxL
(cm) |
L: 100 x 70 x 80 (cm)
XL: 103 x 80 x 84 (cm)
|
Folded Dimension
HxWxL
(cm) |
L: 13 x 70 x 102 (cm)
XL: 14 x 80 x 105(cm)
|
|
Infrared
Panel |
|
3
FIR Material-Coated Super Conductive Heating
Elements |
|
|
Assembly |
30 Sec.- 1 Min.
|
|
Packing
Info |
|
Main Unit x 1
Ceramic Heater x 1
Ionizer x 1
Manual x1
|
|
|
